Machine Operator Hiring Japan – Chartreuse Prime Recruitment Specialist Inc.

CHARTREUSE PRIME RECRUITMENT SPECIALISTS INC.- We are offering for 100 Machine Operator in Japan. Qualified candidates with at least 2 years of working experience in machine operator. Interested applicant are encouraged to submit their application in our office

Requirements:
Candidate must possess at least a Vocational Diploma / Short Course Certificate,
At least 2 year(s) of working experience in the related field is required for this position.
Male, 23 – 35 years old
Must be hardworking, honest and responsible.
Can work with minimum supervision.
With good communication skills.
100 Full-Time position(s) available.

Recruitment POEA Agency: CHARTREUSE PRIME RECRUITMENT SPECIALISTS INC (FORMERLY CHARTREUSE PROMOTION Landbased Agency
Address Location: G/F 3/F 138 GEN LUNA ST BRGY USUSAN TAGUIG
Telephone Numbers: 632-643-4894/643-5400
Email Address: info@chartreuseph.com
Website: www.chartreuseph.com
Official Representative : CHRISTINA DELA CRUZ-FREY
Status: Valid License
License Validity: 12/7/2010 to 12/6/2014

This entry was posted in 2012 Jobs, Japan, Manufacturing and tagged , , , . Bookmark the permalink.

68 Responses to Machine Operator Hiring Japan – Chartreuse Prime Recruitment Specialist Inc.

  1. simeon a. balbin jr says:

    pwede pong malaman kung anong factory po sa japan yung job na hiring at saan lugar. 3 1/2 years po akong nag trabaho bilang machine operator sa PEMCO/GE Lighting gusto ko po sanang mag apply ano po ba ang mga recquirements salamat po.

  2. simeon a. balbin jr says:

    here is my contact #09162259195 i’m very interested on job hiring thanks.

  3. wilhma loyola says:

    Dear Ma’am,
    I was very interested with the job you offered post in the internet, as a machine operator in Japan. I had my previous experienced as production operator training in Ibaraki japan . My age is 38 years old , I know I was over age, but please try to scan my resume and consider my experiences. Thank you and God bless your agency!

  4. rex beatriz says:

    sir,mam ahm 1st timer po ako mag abroad gsto ko po sana aplayan ang machine operator wla po xprience pro po nteresado ako may pasport na po ako at college level po ako…ahm production crew po ang xperience ko

  5. jay jay consunje lizo says:

    formerly employed at cygnus presission south korea..finish 6 year contract..

  6. jay jay consunje lizo says:

    formerly worked at cygnus presission.co.ltd.south korea..finish 6 years contract..

  7. Lilian Sablad says:

    Good Evening is there any lady machine operator? I work 2years in a Japanese Firm her in cavite, as a machine operator in bag making and have knowledge in extrusion.

    And 11 years machine and manufacturing technician in a giant Microchip company so I can do very well both in machine operation and in production production. I’m very good in machine utilization and machine trouble shouting.

    I will be glad if there is a position that suit to my skills.

    Thank you
    Thank you for your time

  8. Reynaldo Lauzon Jr says:

    I would like to apply as machine operator

    • joel salazar says:

      joel salazar 31 yrs old live in caloocan, im willing to pursue to get this got
      i want to know that im a hardworking person, i will follow the
      policies in your company and agency i give my best to
      prove my self that im the one your looking for.

  9. Reynaldo Lauzon Jr says:

    I would like to apply as machine operator to Japan my age is not fit for what agency needed I am 45 years old but I have a lot of experience with regards to the position you looking for. I worked in South Korea for 6 years my contract end up last jan 2012. And now I am looking to find a new one. Hoping for your kind consideration even I am older than what you are looking for I know that age doesn’t matter . As long as you do your job I think is a must .

  10. noel alipio says:

    interested to apply for machine operator to japan

  11. igmedio g. bonrostro says:

    Good day po s inyo, pwede po aq mag aply as machine operator 7yrs po aq factory worker sa isang electronics mnfng company

  12. Jay jay C lizo says:

    formerly machine operator in south korea, finish contract.6 years looking for a job..

  13. mellanie sumbal aparecio says:

    SIR/MADAM: im willing to aply for your japan hiring…

  14. jhan gumayan says:

    i want to apply abroad for my family specially to my kids so that i want to reach and finish their studies. please… can you help me.

  15. jhan gumayan says:

    can you help me to reach my strugle.

  16. jhun titong says:

    i want to apply machine operator type of job in abroad or any job vacancies in any abroad because i want to go abroad for mt family.help me what to do pls

  17. Jelion Ognayon says:

    Hello sir/maam.. ask ko lang on what kind of machine to be operated. Because i have experiences in machine operation but i don’t if my skill or experience is related on your job vacancy.

  18. noel alipio says:

    i am very interested to apply for your vacancies, my experiences are; cnc lathe machine operator, cnc milling machine operator,and plastic injection machine operator, when i was in taiwan and im willing to present to you my certificates when needed,..i am now 35 years old of age,pls do reply me sir/ma’am if qualified…thank you and more power,,,

  19. maribel lagman says:

    gud evening po sir/maam!interested po ko mgaply,bilang machine operator,my experience npo ko,ngwo2rk nga po ko now s 1 company s semiconductor,almost 10yrs npo ko d2,ang skills ko s operation,marking,trimming & formming.ask ko lng po kng san pwde mgaply,willng po kz ko mgwork sa ibng bansa,

  20. Ronaldo P Perez says:

    ako wala ako experience pero hada akong matuto

  21. Ronaldo P Perez says:

    sana mapansin nyo ako willing po ako magtrabaho at matuto sa machince operator

  22. REY OPELINIA GUHITING says:

    I would like to apply as machine operator i had 2years experienced as production operator and HLD CLARK STEEL PIPE CO., INC,

  23. Vic W.Longawis says:

    good day po!interesado po ako applayan ang machine operator for japan,,2 yrs po ako ngwowork d2 sa taiwan as machine operator related in metal..sana po kung my interview kayo email po nyu ako…willing to go home to attend the interview..tnx more power sa company nyu

  24. lizaly gutierrez tanay says:

    Sir/madam
    i am very interested to apply of your
    company
    ihave an experience to company of electronic
    in Okabe Nikoh Corp.phils.
    in Epza Rosario Cavite,
    i start work their in company at 1998
    up to 2001.
    please reply my message……

  25. lizaly gutierrez tanay says:

    Sir/Madam
    i am lizaly gutierrez tanay my real name
    I am 30 yrs old and i have a experience
    to machine operator…
    And i am willing to apply on your company
    as one of your opertor in machine…
    Please kindly response my massge thankyou..

    Respectfully yours
    Lizaly gutierrez tanay

    • roldan razon says:

      good day po. sir mam papano po b mag apply sa company nio? im 40 yrs old po masipag po willing mag overtime, malusog po. gusto ko magtrabaho sa inyo.papano po b ako magpapasa ng requirements/ galling po ako sa Toyota auto parts.. operator po

  26. joel salazar says:

    ask ko lang po if salary deduction po ba ang agency nyo.
    willing po me mag aply sa agency

  27. ernie vargas says:

    goodmorning mam..sir..
    gs2 q po sna mag aply 4 machine operator. anu po b kailangan mga requarments? 4yers po q sa electronics company, bilang machine operator. hnd po aq collge level.pwd po b un kht hnd collge level? tnx.godbles..

  28. merlyn deonido says:

    Pwde po b khit experince lng

  29. ozka mones says:

    Sir/Ma’am ,
    Im very much willing to apply for this position , I would like to have the opportunity to discus this position with you further. Thank you very much and I await your reply.

  30. Ronalyn M.Balderama says:

    I am working at Futaba Corporation of the Philippines Japanese Company almost 15 years work experience as production operator and promoted as Quality checker.I am willing to work with your company as soon as possible eventhough I am high school graduate I can handle anything related to work in the production .Hoping for your kind cosideration.OHAYO GOZAIMAS…….

  31. ruel paredes perlada says:

    mam /sir can i apply this position..im ex japan 3yrs…can u txt my no.09392417366..thank you n god bless

  32. ehron g.villanueva says:

    Good day mam/sir.i would like to apply in your company as a machine operator.

  33. benjie monares says:

    good day ,maam/sir gusto po akung mg apply sa machine oprator.anu po vang kylngan nah requirements?2 years m-oprator po ako sa saudi arabia,at maraming experience na dn ako d2 sa pnas.

  34. EDUARD P. VENDIOLA says:

    SIR/MAM,

    I would like to inquire about your job hiring,Iam Eduard P. Vendiola, 30 years old an employed machine operator at Subic Bay Freeport Zone,Olongapo City,I am a Machine Operator in Sanyo Denki Philappines,a Press Stamping Machine ( AIDA PRESS MACHINE )for almost 4 years, Im interested on the job you have been post on your job vacancy.I have a knowledge in METALIC DIE MAINTENANCE.

  35. ERNIE D. VARGAS says:

    good day.. mam / sir..
    i wnt aply machine operator in your cmpany im working in the Pricon Microelectronics in the phllpines.japanes cmpny.. actualy im a operator technician as of 4yer.. but im high school grduate, but im a hardworking..tnx..godbless

  36. ernie d. vargas says:

    my # 09163190897 plz txt me..tnx…

  37. Dino Martin says:

    i almost working as production operator in different company could i belong to apply to your agancy mam/sir…

  38. isagani ulep says:

    mam/sir gusto ko pong magaply ng operators sa japan dahil my experience n po dto sa taiwan operator po ako until now ang uwi ko pa po ay october kya po interisado me n mg aply sa japan for operators

  39. Albert says:

    Hi…i work now in south korea as a machine operator for 3years i want to aply in japan same job im 25 from davao city phillippines how can aply hare

  40. christine dimaala says:

    im very much interested to your job hiring…i’m 8yrs working experience as high pressure machine operator in automotive manufacturing firm a japanase company…pls contact 09158974296 me to know how to apply@requirements needed…thank you in advance…

  41. Manilyn R. Parafina says:

    ma’am/sir good day po,im manilyn parafina 23 years old,im willing to apply ur good agency as a factory worker,my experienced is beauty consultant in mall,if u have anything vacancies that fit for me plz inform me or tx me at 09129653216,thank you so much,

  42. Eisel leo says:

    Sir/MAdam I would like to apply as a machine operator in japan. I had my expiienced as machine operator, production operator, assembler and QA for 3 years in hitachi automotive ltd. Japan ibaraki ken. And i know how to speak japanese langguage. Thankyou

  43. jefrey says:

    Sir/Maam i willing to apply this position.

  44. gilly cendana says:

    Sir/mam i would like to appy as a machine operator in japan.i have a experienced in machine operator in taiwan im working till now at unimicron technolgy corp as a machine operator.my end contract was on september 12.2013 for 6 years as a machine operator.thank you..

  45. nelda basilio says:

    gud day sir/madam ala po bang ibang hiring n pede po age q i’m 39 year lod n po at ex- abroad po ng japan.

  46. catherine medrano says:

    gusto ko po magwrk in japan, pwede po b ang late regsterd ,nso cert, mur than 3 yrs experience po aq machine operarot heres my no 09304034142 tnx po

  47. Kim L. Cea says:

    Ma’am/Sir, I am Kim L. Cea currently employed as a QA Labtech on a manufacturing company here in the Philippines for ten years, and I think I have enough knowledge in manufacturing and also provide excellent quality that will meet customers satisfaction.
    I am willing to apply for this job,hope you will reply on me.

    thanks!

  48. jason ilao morales says:

    hi mam/sir:

    willing po ako mg apply ask a machine operator s japan,, 6years and 3 months po ako ngwork s NXP SEMICONDUCTORS PHIL.INC, bilang isang production operator,,wire bond, die bond at molding po yong makina ko dating hawak…tnx po…godbless

    jason ilao morales
    applicant

  49. king samuel ayap says:

    Sir/Madam I’m willing to apply as a machine operator in japan. I’m 25 years old, I work in Hitachi Cable Philippines Inc. since 2007-2010 as production operator, 2011 up to present I am now a line leader. I also sent in japan for 1 month training for ATM products in Shizuoka, Japan. I speak and understand a little bit Japanese but not so fluent. Please contact me on this # 09103530323 if you consider my message. Arigatou Gozaimasu..

  50. Melvin M. Vanguardia says:

    Im Melvin, Applying for the position of Plastic injection Machine technician, ask q lng po if hiring kau ng injection technician, almost 8 years npo experience q sa field na e2.. e2 po cp # q,0909-898-1132. interested po q mg-apply sa agency nyo. hoping for ur kind response, tnx and god bless…

  51. anthony idanan says:

    Good Day!
    I am interested to work in Japan as Production Operator may experience na ako ng machine operator for always 7 yrs. in the philippines, nagwork n ako sa japan as carpenter kaya ask ko sana kung pwede ang x-japan. Thank you

  52. Tyrone berial says:

    Mam,interested po ako as machine operator..nkapag operate n po me ng press machine

  53. Ernesto c. Pare says:

    Mam/sir I’m ernie 35 yrs old gusto ko po sanang mag aply ng machine operator sa Japan , 6yrs po akong machine operator sa sanyo capacitor Phil. Corp. at 3yrs po akong CNC machine operator sa Taiwan , my cp no. 09203454504. Thank you and god bless….

  54. Dear Sir/Madam,
    I am very interested po sa advertisement nyo ,since wala po akong experience sa machine operator po But nagwowork po ako now here in japanese company MANUFACTURING as a japanese interpreter for almost 2years untill present po,gusto ko po sanang mag apply sa inyo kahit anong work sa japan even manufacturing din po,hinding hindi po ako tumtanggi kahit anong position ko mababa man yan o mataas na position naka focus po kc ako sa Goal ko at more Experiences pa, even im 38 years old na po,sana matulungan po nyo akong maka alis..maraming salamat po! 0927-268-5332

  55. lito ramos says:

    Dear sir/madam, good day po I’m lito Ramos 31 years old. I willing to apply in ur good egency as machine operator. My experienced is 6 years machine operator and mold setter. In taiwan. Pls. Contact 09369128482 thanks in advance.

  56. Francis matias says:

    im francis matias willing to apply my work experience cnc programing operator now im here taiwan because january 11 2015 im finish contract to my company and pls tell how to apply to japan thank you and godbless you

  57. Gaylord B Valdez says:

    Good morning sir,maam. recently I work in taiwan for 3 years in a Plating Company, and I am interested to your offer machine operator and willing to undergo a training if required. Thank you

  58. jundel salvador says:

    ito po cel# 09396278923 plant tech po aq gusto q pong mag abroad?

  59. Michael Angelo ocampo says:

    Good day sir/ma’am

    I’m very interested in this job as machine operator.i have a 5 years working experienced as machine operator in a manufacturing company in Philippines which is SWM/PDM Philippines.and as of now I’m working here in dubai as machine operator and I will going to take my vacation on December and I going to finish my contract on March 2015.

    Thanks and God bless

  60. Dianalyn Camarillo says:

    willing poh aq magapply ask q lng poh sana if qualify poh aq dto kz undergrad poh aq ng college..pro my long time experience poh aq s electronics 6yrs and almost 2 yrs semi conductor s taiwan..im hoping n my mgfifit s skills q slamt..

  61. Dianalyn Camarillo says:

    ask q lng poh pwede poh bng college level lng dto 6 yrs electonics and almost 2 yrs semi conductor in taiwan..im 24 willing n wiling poh aq mgapply sana pwede poh aq dto slmat

  62. Lea Fe Escudero Lorenzo says:

    gud pm poh’ like ko poh mag apply sa Japan. Im willing to work poh. x abroad poh ako. graduate din poh ako ng Computer Hardware Servicing poh sa TESDA. at nagwork din po ako bilang baker. sana poh mabigyan u me ng work sa Japan. tnx poh. e2 poh no. ko 09272820731

  63. JUN REX ARCE TABUAN says:

    Good day sir/maam i am interested to apply in your good company in ibaraki japan and im willing to work in any vacant position. i am computer hardware sevicing graduate and electrical vocational course, i have two years off experience in industrial power plant as a electrician and Intrumentation assistant..i am willing to go for interview or you can reach me in my phone number.. 09392989707

  64. john paul tenio says:

    hello willing po ako mag.aply sa in.u. Ka.c may experience naman aq about machinening. Nag trabaho ako dito sa MEPZ 2 sa lapu-lapu city,Cebu. Sa Yamaki Philippine Corporation po ako nagtatrabaho as a machine operator. Two and half year na po ako nagtatrabaho and 24 years old na po aq.

  65. Alarma Robin Lorinio says:

    good day ma’am,sir..
    Im 26 yrs old. Im so interested to work in machine operator.I have a expirience @ ezset tonglung phils.metal industry. as a stamping press machine operator in 4 and half years..I hope you geting me.thanks and godbless..

Google Advertisement

Leave a Reply to Dianalyn Camarillo Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.